We know that a resistor is a two-terminal device and is an important component in building many electronic devices. The resistor is a component that is used to limit or regulate the flow of electric current. We commonly see resistors printed with different colors. It usually contains four bands of colours. To know the value of resistors, one must know how to calculate the resistance colour code. In this article, let us learn what is resistance colour code, how to read resistor colour code, and examples to find resistance colour code.
| Table of Contents: |
What is Resistor Colour Code?
Resistors are usually very tiny, and it is challenging to print resistance values on them. So, colour bands are printed on them to represent the electrical resistance. These colour bands are known as resistor colour code. The resistor colour code was invented in the 1920s by the Radio Manufacturers Association (RMA).
All leaded resistors with a power rating up to one watt are marked with colour bands. They are given by several bands and together they specify the resistance value, the tolerance rate and sometimes the reliability or failure rates. The number of bands present in a resistor varies from three to six. The first two bands indicate the resistance value and the third band serves as a multiplier. In this piece of article, let us discuss how to read resistor colour codes, look at an example and learn a mnemonic to remember the number sequence.
| For Better Understanding: |
| What is a Resistor? |
| Types of Resistor |
Resistor Colour Table
| Colour | Digit | Multiplier | Tolerance |
| Black | 0 | 1 | |
| Brown | 1 | 10 | ± 1% |
| Red | 2 | 100 | ± 2% |
| Orange | 3 | 1000 | |
| Yellow | 4 | 10,000 | |
| Green | 5 | 100,000 | ± 0.5% |
| Blue | 6 | 1,00,000 | ± 0.25% |
| Violet | 7 | 10,000,000 | ± 0.1% |
| Grey | 8 | ± 0.05% | |
| White | 9 | ||
| Gold | 0.1 | ± 5% | |
| Silver | 0.01 | ± 10% |
How to Read Resistor Colour Code?
- To read them, hold the resistor such that the tolerance band is on your right. The tolerance band is usually gold or silver in colour and is placed a little further away from the other bands.
- Starting from your left, note down all the colours of the bands and write them down in sequence.
- Next, use the table given below to see which digits they represent.
- The band just next to the tolerance band is the multiplier band. So if the colour of this band is Red (representing 2), the value given is 102.
Learning with an example
After learning about resistance colour codes, let us learn how to find resistor color codes with an example. Here’s an example to get you started:
The band colours for resistor colour code in the order:
| Band colours in order | RED | RED | BLACK | GOLD |
| Digit representation | 2 | 2 | 1 | ±5% |
| Value | 22 Ω ±5 % | |||
The tolerance values represent by how much the resistance can vary from its mean value in terms of percentage. A gold band represents the lowest variation, so be sure to buy these at the electronics store. The value of the given resistance is: 22 Ω ± 5% . The tolerance of the resistor can be calculated as follows:
Tolerance=Value of resistor × value of tolerance band
= 22 Ω × 5% = 1.1 Ω
This means that the 22 Ω resistor with a tolerance value of 1.1 Ω could range from the actual value as much as 23.1 Ω to as little as 20.9 Ω. It is important to note that the band next to the tolerance band represents the multiplier. All the bands to the left of this band represent the significant digits. There can be more than two such bands.
The below video helps in understanding why colour coding is important in resistors:
Resistor Colour Code Mnemonic
You can remember the colour code values using the following mnemonic:
BB ROY of Great Britain had a Very Good Wife
The capital letters represent the first letters of the colours and their positions the digit values. Now that we have an idea to determine the resistance value of a given resistor. Let us solve some problems related to this in the next section.
Resistor Colour Code Examples
Q1) Determine the resistance of the given resistor with the given colour sequence (Red, Green, Red, Gold).
As we know, the first two colours represent the significant digits of resistance value so the given colours represent digits 2 and 5. The third band is a multiplier band. Hence, the colour red represents a multiplier factor of 102. The last band represents the tolerance level and the tolerance level of the resistor is ±5%. Hence, the resistance value of the given resistor is 2500 ± 5% Ω or 2.5 kΩ.
Q2) What colour bands would a resistor of resistance value 1000 Ω with a tolerance level ±5% have?
The colour bands of the resistor would look like this:
Frequently Asked Questions – FAQs
How does a resistor colour code work?
Why are resistors colour coded?
How to remember the resistor colour code?
What is the resistor colour code for a 1000 Ω resistor?
Who invented the resistor colour code?
Hope you learned how to find the resistance colour code. Stay tuned to BYJU’S and Fall in love with learning!
It’s amazing?????
Thanks
It’s really amazing!